Water Heater Repair in West Jordan, UT — We Fix It Right or Replace It Right

I'd been getting intermittent hot water for a couple weeks before it stopped entirely. The tech traced it to a failing gas control valve that was cycling the burner erratically. He had the replacement valve on the truck, swapped it, and tested the unit through a full heat cycle before leaving. Explained the whole process clearly.

{Electric water heater wouldn't recover — we'd get about 10 minutes of hot water and then cold. Masters Plumbing Service's tech identified the lower heating element had failed. He drained the tank, replaced the element and lower thermostat while he was in there, and restored full recovery capacity. Explained the difference between upper and lower element function which I'd never understood before.|Woke up to the floor drain running under our water heater — the T&P valve was dripping continuously. The tech identified it wasn't just dripping from normal thermal expansion but was a valve that had corroded open. Replaced the valve, re-routed the discharge pipe to code, and verified tank pressure was within normal range before leaving.}

Our tankless Navien unit started throwing error code 027 — heat exchanger overtemp. The tech explained that's almost always scale buildup restricting flow through the heat exchanger. He performed a descaling flush with a food-grade citric acid solution through the service ports, cleared the scale, and restored normal flow. Unit's been running clean ever since. Much cheaper than I expected.